MUTOH Zephyr TS, User Manual, Page: 137 / 300

User’s Guide Zephyr TS
Basics
AP-75390 - Revision 1.0 137
4
4.12.8 Working with the autopilot
It is possible to work with an autopilot. This means that when you set the autopilot ON, all the
jobs inside the active print queue with the autopilot checkbox = enabled, will start printing
automatically. When the autopilot checkbox is disabled, these jobs will remain in the queue
and will not be printed automatically. To work with the autopilot, proceed as follows.
Step 1:
Click the
Job management
tab.
Step 2:
In the job pool, select the print jobs of which you want to work with the autopilot.
Step 3:
Click the
Autopilot mode
button.

The printer imports all selected files in the print queue, and prints them according
to the autopilot settings.
Refer to
Adding job selection criteria on page 185
Note

The priority of the print jobs is set in the autopilot settings.
Refer to
Priority of the job selection criteria on page 186
Note

To stop working with the autopilot mode, click the operator mode button.