MUTOH Zephyr TS, User Manual, Page: 107 / 300

User’s Guide Zephyr TS
Basics
AP-75390 - Revision 1.0 107
4
See also

Switching the power ON on page 40

Loading media on page 61

Performing a nozzle check on page 101

Cleaning the heads on page 22 4
How to determine and change the step
Step 1:
Power ON the printer.
Refer to
Switching the power ON on page 40
Step 2:
Load the media to print on.
Refer to
Loading media on page 61
Step 3:
Perform a nozzle check.

This to be sure that all nozzles are present and not misfiring. If necessary,
perform a head cleaning.
Refer to
Performing a nozzle check on page 101
Refer to
Cleaning the heads on page 22 4
Step 4:
Click the
calibration
tab.
Note

Make the decision whether or not you will be using the winder 100 before
setting the step. The step will be different when printing Roll-to-Sheet then
when printing Roll-to-Roll.