MUTOH Zephyr TS, User Manual, Page: 42 / 300

User’s Guide Zephyr TS
Basics
42 AP-75390 - Revision 1.0
Step 7:
Leave the printer idle for 30 minutes. This is necessary to:

ensure nozzle stability

degass the ink

warm up the heads to the requested temperature (± 43 °C).
Refer to
Checking the temperature and pressure settings on page 99

The last 10 minutes you can also define the heater settings. This way you can
immediately start printing once the time has passed.
Refer to
Heater settings on page 2 0 3
Step 8:
The initialization of the printer is complete once the monitor displays the Zephyr TS
User Interface.
Note

Make sure the heaters are not operating the complete half hour. If heating it so
long, Feed the media forward before using it. This to prevent that media curls
lead to head strikes.
Note

The jobs you have loaded previous times, will remain in the job pool if you did
not delete them.