manualshive.com logo in svg

MUTOH Zephyr TS, User Manual, Page: 166 / 300

Share
Download
MUTOH Zephyr TS User Manual Download Page 166

User’s Guide Zephyr TS

Basics

166

AP-75390 - Revision 1.0

Step 4: 

Lock the printer carriage left and right, to avoid that the carriage spontaneously 
moves during transportation. 

Step 5: 

Secure the printer LCD-display with some protective foam.  Secure the LCD display 
with plastic or paper to avoid the screen becoming dirty.

Step 6: 

Fix the front cover + maintenance cover to the printer with insulation tape (which is 
easily removable afterwards)

Step 7: 

Secure the backup-stick + chip-reader with insulation tape to avoid loss during 
transportation

Step 8: 

Fix the swingbars to avoid that they move during transportation and don't get 
damaged because of transportation-shocks, etc.

Step 9: 

Ensure that the ink-bottles are less than half full.  When there is too much ink, it 
might spill-out during transportation!  Fix the ink bottles caps to avoid falling-off 
during transportation. 

Pack the keyboard-table + ke mouse separately in a protective packaging. 

Packaging the Zephyr TS in the original box is strongly recommended.  When 
packing in the original box, the printer can be re-secured on the pallet and fixed with 
17mm bolts.  To fix / unfix, an electric screwdriver with P2 bit + a 17mm wrench are 
required tools!

Make sure the printer is not uniquely standing on its wheels during transportation!

All the feet must be turned-out to avoid the printer, rolling-off of the pallet or 
transportation.

4.16.3 Medium-Long 

distance 

transportation for long-term

(Storage or moving the printer to another customer)

Please contact your authorized Mutoh technician for the correct transportation 
procedure.

Summary of Contents for Zephyr TS













































































































































































































































































































Reviews:

No comments