7-6
Motorola RF Switch System Reference Guide
2. Refer to the
Community Name
and
Access Control
parameters for the following information:
3. Highlight an existing entry and click the
Edit
button to modify the properties of an existing SNMP V1/v2
community and access control definition. For more information, see
Editing an Existing SNMP v1/v2
Community Name on page 7-6
.
7.3.1.1 Editing an Existing SNMP v1/v2 Community Name
The
Edit
screen allows the user to modify a community name and change its read-only or read/write
designation. Since the community name is required to match the name used within the remote network
management software, it is recommended the name be changed appropriately to match a new naming (and
user) requirement used by the management software.
To modify an existing SNMP v1/v2 Community Name and Access Control setting:
1. Select
Management Access
>
SNMP Access
>
v1/v2
from the main menu tree.
2. Select an existing Community Name from those listed and click the
Edit
button.
3. Modify the
Community Name
used to associate a site-appropriate name for the community. The name
revised from the original entry is required to match the name used within the remote network
management software.
4. Modify the existing read-only (R)
access
or read/write (RW)
access
for the community. Read-only
access allows a remote device to retrieve information, while read/write access allows a remote device
to modify settings.
5. Click
OK
to save and add the changes to the running configuration and close the dialog.
6. Refer to the
Status
field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch
7. Click
Cancel
to return back to the SNMP v1/v2 screen without implementing changes.
7.3.2 Configuring SNMP v3 Access
SNMP Version 3 (SNMPv3) adds security and remote configuration capabilities to previous versions. The
SNMPv3 architecture introduces the
User-based Security Model
(USM) for message security and the View-
Community Name
Displays the read-only or read-write name used to associate a site-appropriate
name for the community. The name is required to match the name used within the
remote network management software. Click the
Edit
button to modify an existing
Community Name. The string length is <0-11>.
Access Control
The Access Control field specifies a read-only (R) access or read/write (RW) access
for the community. Read-only access allows a remote device to retrieve
information, while read/write access allows a remote device to modify settings.
Click the
Edit
button to modify an existing Access Control permission.
Summary of Contents for RFS Series
