Motorola RFS Series, System Reference Manual

Page: 335 / 590

Switch Services
5-53
5.6 Configuring Self Healing
The switch supports a feature called Self Healing that enables radios to take corrective action when one or
more radios fail. To enable the feature the user must specify radio neighbors that would self heal if either
one goes down. The neighbor radios do not have to be of the same type. Therefore, an 11bg radio can be the
neighbor of a 11a radio and either of them can self heal when one of them fails.
The switch initiates self healing when it looses communication with the Access Port or when another radio
(configured in detector mode) informs the switch a particular radio is not transmitting beacons.
To configure self-healing on the switch:
1. Select Services > Self Healing from the main menu tree.
The Self Healing page launches with the Configuration tab displayed.
2. Select the Enable Neighbor Recovery checkbox.
Enabling Neighbor Recovery is required to conduct manual neighbor detection.
3. Refer to the Interference Avoidance field to define the following settings:
4. Click the Apply button to save the changes made within this screen. Clicking Apply overwrites the
previous configuration.
Enable Interference
Avoidance When enabled, the switch is capable of switching channels on an Access Port
(
Automatic Channel Selection ) if interference is observed on the current operating
channel.
Average Retries Displays the average number of retries for a MU to communicate with a neighbor
radio. Define a retry value between 0.0 and 15.0 retry attempts. Average Retries
is a threshold value, when exceeded ACS is initiated.
Hold Time Set the interval (in seconds) that disables interference avoidance after detection.
The hold time prevents the radio from re-running ACS continuously.