Motorola RFS Series System Reference Manual Download Page 166

Page: 166 / 590

4-64

Motorola RF Switch System Reference Guide

2. Click the

Graph

button.

The

WLAN Statistics

screen displays for the select port. The

WLAN Statistics

screen provides the

option of viewing the graphical statistics of the following parameters:

• Pkts per sec

• Throughput (Mbps)

• Avg Bits per sec

• Avg Signal (dBm)

• Dropped Pkts

• TX Pkts per sec

• TX Tput (Mbps)

• NUcast Pkts

• Avg Noise (dBm)

• Undecr Pkts

• RXPkts per sec

• RX Tput (Mbps)

• Avg Retries

• Avg SNR (dB)

•

# Radios

3. Select any of the above listed parameters by clicking on the checkbox associated with it.

4. Click the

Close

button to exit the screen.

4.5.2.3 Viewing WLAN Switch Statistics

The

Switch Statistics

screen displays the sum of all WLAN statistics. The

Switch Statistics

screen is

optimal for displaying a snapshot of overall WLAN traffic on your switch.

NOTE:

You cannot select (and send) more than four parameters at any given time.

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RFS Series

Reviews:

Related manuals for RFS Series

Brands by name

Popular brands

Motorola RFS Series, System Reference Manual

Search results

Summary of Contents for RFS Series

Reviews:

Related manuals for RFS Series

Brands by name

Popular brands