Motorola RFS Series System Reference Manual Download Page 85

Page: 85 / 590

Switch Information

3-29

3.4 Viewing Switch Firmware Information

The switch can store (retain) two software versions (primary and secondary). Information supporting the two
versions displays within the

Firmware

screen. The

Version

column displays the version string. The

Build

Time

is the date and time each version was generated.

Install

represents the

date and time the upgrade

was performed.

Next Boot

indicates which version should be used on the next reboot. The Next Boot version

should match the

Running Version

, unless the system has failed over to another version.

To view the firmware files available to the switch:

1. Select

Switch

Firmware

from the main menu tree.

2. Refer to the following information displayed within the Firmware screen:

Image

Displays whether a firmware image is the primary image or a secondary image.
The primary image is typically the image loaded when the switch boots.

Version

Displays a unique alphanumeric version for each firmware file listed.

Current Boot

A check mark within this column designates this version as the version used by the
switch the last time it was booted. An “

X”

in this column means this version was

not used the last time the switch was booted.

Next Boot

A check mark within this column designates this version as the version to be used
the next time the switch is booted. An

“X”

in this column means this version will

not be used the next time the switch is booted. To change the boot designation,
highlight an image and click the

Edit

button.

Built Time

Displays the time the version was created (built). Do not confuse the Built Time
with the time the firmware was last loaded on the switch.

Install Time

The Install Time is the time this version was loaded with on the switch.
Periodically review this information to assess the relevance of older files.

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RFS Series

Reviews:

Related manuals for RFS Series

Brands by name

Popular brands

Motorola RFS Series, System Reference Manual

Search results

Summary of Contents for RFS Series

Reviews:

Related manuals for RFS Series

Brands by name

Popular brands