manualshive.com logo in svg

Motorola RFS Series, System Reference Manual

The Motorola RFS Series is a comprehensive line of professional-grade communication systems. To help you navigate its functionalities effortlessly, we offer a convenient System Reference Manual for download, completely free of charge. Access this invaluable resource at manualshive.com and unlock the full potential of your Motorola RFS Series device.

Share
Download
background image

Switch Management   

7-3

 

1. Select 

Management Access 

>

 Access Control 

from the main menu tree. 

2. Refer to the 

Management Settings

 

field to enable or disable the following switch interfaces:

Secure Management 
(on Management 
VLAN only)

Select this checkbox to allow management VLAN access to switch resources. The 
management VLAN is used to establish an IP connection to the switch from a 
workstation connected to a port in the VLAN. By default, the active management 
VLAN is VLAN 1, but you can designate any VLAN as the management VLAN. Only 
one management VLAN can be active at a time. This option is disabled (not 
selected) by default.

Enable Telnet

Select this checkbox to allow the switch to use a Telnet session for communicating 
over the network. This setting is enabled by default.

Port

Define the port number used for the Telnet session with the switch. This field is 
enabled as long as the Enable Telnet option remains enabled. The default port is 
port 23.

Enable SNMP v2

Select this checkbox to enable SNMPv2 access to the switch over the SNMPv2 
interface. This setting is enabled by default.

Enable SNMP v3

Select this checkbox to enable SNMPv3 access to the switch over the SNMPv3 
interface. This setting is enabled by default.

Retries

Define the number of retries the switch uses to connect to the SNMP interface if 
the first attempt fails. The default value is 3 retry attempts.

Timeout

When the provided interval is exceeded, the user is logged out of the SNMP 
session and forced re-initiate their connection. The default value is 10 minutes. 

Enable HTTP

Select this checkbox to enable HTTP access to the switch. The Hypertext Transfer 
Protocol (HTTP) is an application-level protocol for distributed, collaborative, 
hypermedia information systems. This setting is enabled by default.

Enable HTTPS

Select this checkbox to enable HTTPS access to the switch. This setting is enabled 
by default.

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RFS Series

IBM TotalStorage 3534-F08 Installation And User Manual preview
TotalStorage 3534-F08
Brand: IBM Pages: 105
IBM RedBooks SAN24B-5 Product Manual preview
RedBooks SAN24B-5
Brand: IBM Pages: 11
IBM RedBooks SAN24B-5 Quick Start Manual preview
RedBooks SAN24B-5
Brand: IBM Pages: 2
IBM F16 User Manual preview
F16
Brand: IBM Pages: 123
IBM 8265 Nways ATM Switch User Manual preview
8265 Nways ATM Switch
Brand: IBM Pages: 192
CYP PU-8H8HBTPL-4K22 Operation Manual preview
PU-8H8HBTPL-4K22
Brand: CYP Pages: 24
H3C S3100-SI Series Quick Start Manual preview
S3100-SI Series
Brand: H3C Pages: 58
Clever Little Box Wi-View 300V User Manual preview
Wi-View 300V
Brand: Clever Little Box Pages: 15
Tripp Lite B155-002-DP-V2 Owner'S Manual preview
B155-002-DP-V2
Brand: Tripp Lite Pages: 12
Ask HDSW0024M1 User Manual preview
HDSW0024M1
Brand: Ask Pages: 4
Ormazabal velatia cgm.3 system General Instructions Manual preview
velatia cgm.3 system
Brand: Ormazabal Pages: 76
IDT 89HPES12N3 User Manual preview
89HPES12N3
Brand: IDT Pages: 158
Accton Technology CheetaHub Classic-2041 Quick Installation Manual preview
CheetaHub Classic-2041
Brand: Accton Technology Pages: 7
Hailink MX44NN00RK User Manual preview
MX44NN00RK
Brand: Hailink Pages: 6
Gefen EXT-DVIK-MV-441 User Manual preview
EXT-DVIK-MV-441
Brand: Gefen Pages: 136
Belkin BusStation F5U100, BusStation F5U100-BLU, BusStation FW100-SLV, BusStation F5U100-ORG User Manual preview
BusStation F5U100, BusStation F5U100-BLU, BusStation FW100-SLV, BusStation F5U100-ORG
Brand: Belkin Pages: 7
Qlogic SilverStorm 9120 Quick Start Manual preview
SilverStorm 9120
Brand: Qlogic Pages: 16
Accton Technology ES4512C Management Manual preview
ES4512C
Brand: Accton Technology Pages: 426

Brands by name

Popular brands

Load more brands