Motorola RFS Series System Reference Manual Download Page 259

Page: 259 / 590

Network Setup

4-157

•

Viewing and Configuring Bridge Instance Details

•

Configuring a Port

•

Viewing and Configuring Port Instance Details

4.10.1 Configuring a Bridge

Use the

Bridge

tab to configure the Bridge. This window displays bridge configuration details for the switch

To configure the MSTP bridge:.

To configure the MSTP bridge:

1. Select

Network

Multiple Spanning Tree

from the main menu tree.

2. Select the

Bridge

tab (should be the displayed tab by default).

3. Refer to the

MSTP Parameter

field to view or set the following:

Global MSTP Status

Use the drop-down menu to define MSTP status. The default is Enabled.

Max Hop Count

Displays the maximum allowed hops for a BPDU (

Bridge Protocol Data Unit)

in an

MSTP region. This value is used by all the MSTP instances.

Supported Versions

Displays the different versions of STP supported.

Protocol Version

Displays the current protocol version in use. Available MSTP protocol versions are:

•

forceNonStp

•

forceLegacyDot1d

•

forceDot1w

•

autoDot1s

•

unknown

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RFS Series

Reviews:

Related manuals for RFS Series

Brands by name

Popular brands

Motorola RFS Series, System Reference Manual

Search results

Summary of Contents for RFS Series

Reviews:

Related manuals for RFS Series

Brands by name

Popular brands