manualshive.com logo in svg

Motorola RFS Series, System Reference Manual

The Motorola RFS Series is a comprehensive line of professional-grade communication systems. To help you navigate its functionalities effortlessly, we offer a convenient System Reference Manual for download, completely free of charge. Access this invaluable resource at manualshive.com and unlock the full potential of your Motorola RFS Series device.

Share
Download
background image

Network Setup   

4-61

 

4. To view WLAN statistics in greater detail, select a WLAN and click the 

Statistics 

button. For more 

information, see 

Viewing WLAN Statistics in Detail on page 4-61

.

5. To view WLAN statistics in a graphical format, select a WLAN and click the 

Graph 

button. For more 

information, see 

Viewing WLAN Statistics in a Graphical Format on page 4-63

.

6. To view WLAN packet data rates and retry counts, select a WLAN and click the 

Switch Statistics

 

button. For more information, see 

Viewing WLAN Switch Statistics on page 4-64

. 

4.5.2.1 Viewing WLAN Statistics in Detail

When the WLAN Statistics screen does not supply adequate information for an individual WLAN, the 

Details

 screen is recommended for displaying more granular information for a single WLAN. Use this 

information to discern if a WLAN requires modification to meet network expectations.

To view detailed statistics for a WLAN:

1. Select a 

Network

 

> 

Wireless LANs

 from the main menu tree.

2. Click the 

Statistics

 tab.

3. Select a WLAN from the table displayed in the Statistics screen. and click the 

Details

 button. v

The 

Details

 screen displays the WLAN statistics of the selected WLAN. 

Avg BPS

Displays the average bit speed in Mbps for the selected WLAN. This includes all 
packets sent and received.

% Non-UNI

Displays the percentage of the total packets for the selected WLAN that are non-
unicast packets. Non-unicast packets include broadcast and multicast packets.

Retries

Displays the average number of retries for all MUs associated with the selected 
WLAN.

NOTE: 

When using mesh-enabled WLAN statistics, no statistics are shown. This is 

because WLAN statistics are generated by mobile unit traffic for that particular WLAN. In 
a mesh configuration, there are typically no mobile units associated and therefore no 
statistical information to display.

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RFS Series

D-Link xStack User Manual preview
xStack
Brand: D-Link Pages: 357
KELCO E30 Programming Instructions Manual preview
E30
Brand: KELCO Pages: 22
Cabletron Systems SmartCell 6A000 User Manual preview
SmartCell 6A000
Brand: Cabletron Systems Pages: 114
Cabletron Systems MRX Installation Manual preview
MRX
Brand: Cabletron Systems Pages: 62
Cabletron Systems CyberSWITCH CSX150 Quick Start Manual preview
CyberSWITCH CSX150
Brand: Cabletron Systems Pages: 49
Cabletron Systems Cabletron CyberSWITCH CSX5500 User Manual preview
Cabletron CyberSWITCH CSX5500
Brand: Cabletron Systems Pages: 729
Eaton NR Installation And Operation Instructions Manual preview
NR
Brand: Eaton Pages: 12
Delta EXPERT-POE-54G User Manual preview
EXPERT-POE-54G
Brand: Delta Pages: 4
Farallon Fast Starlet User Manual preview
Fast Starlet
Brand: Farallon Pages: 22
StarTech.com VS221HD20 Quick Start Manual preview
VS221HD20
Brand: StarTech.com Pages: 2
Gira 2324 Series Operating Instructions preview
2324 Series
Brand: Gira Pages: 2
Wetekom 83 52 59 Original Instruction Manual preview
83 52 59
Brand: Wetekom Pages: 34
Origin Instruments Swifty SW2 User Manual preview
Swifty SW2
Brand: Origin Instruments Pages: 6
Minicom Smart 4 User Manual preview
Smart 4
Brand: Minicom Pages: 16
Pilz 506401 Operating Manual preview
506401
Brand: Pilz Pages: 20
Zhuoyi ZYT09 User Manual preview
ZYT09
Brand: Zhuoyi Pages: 2
Extron electronics FOX 4G SW8 Setup Manual preview
FOX 4G SW8
Brand: Extron electronics Pages: 1
AMX AVS-OCT-4832-117 Product View preview
AVS-OCT-4832-117
Brand: AMX Pages: 1

Brands by name

Popular brands

Load more brands