Motorola RFS Series, System Reference Manual

Page: 438 / 590

6-84 Motorola RF Switch System Reference Guide
2. Click the Crypto Maps tab and select Crypto Map Entries .
3. Review the following Crypto Map attributes to determine if an existing Crypto Map requires revision,
deletion or if a new Crypto Map needs to be created.
4. Select an existing Crypto Map and click the Edit button to modify the Crypto Map’s attributes.
If an entire Crypto Map requires revision, consider deleting the Crypto Map and creating a new one using
the
Add function.
Refer to the definitions supplied for the Add Crypto Map screen (on the next page) to ascertain the
requirements for editing a Crypto Map.
5. Select an existing Crypto Map and click the Delete button to remove it from the list of available.
Priority / Seq Displays the numerical priority assigned to each Crypto Map.
Name Displays the user-assigned name for this specific Crypto Map. This name can be
modified using the
Edit function or a new Crypto Map can be created by clicking
the Add button.
Mode Config Displays a green checkmark for the Crypto Map used with the current interface. A
“X” is displayed next to other Crypto Maps not currently being used.
Number of Peers Displays the number of peers used by each Crypto Map displayed.
SA Lifetime (secs) Displays a SA Lifetime (in seconds) that forces the periodical expiration and re-
negotiation of peer credentials. Thus, continually validating the peer relationship.
SA Lifetime (Kb) Causes the security association to time out after the specified amount of traffic (in
kilobytes) has passed through the IPSec tunnel (using the security association).
ACL ID Displays the name of the ACL ID used for each Crypto Map.
Number of Interfaces Displays the number of interfaces each specific Crypto Map is used with.