manualshive.com logo in svg

Motorola RFS Series, System Reference Manual

The Motorola RFS Series is a comprehensive line of professional-grade communication systems. To help you navigate its functionalities effortlessly, we offer a convenient System Reference Manual for download, completely free of charge. Access this invaluable resource at manualshive.com and unlock the full potential of your Motorola RFS Series device.

Share
Download
background image

4-6   

Motorola RF Switch System Reference Guide

 

6. Click 

Cancel

 to close the dialog without committing updates to the running configuration.

4.2.2 Configuring IP Forwarding 

The IP Forwarding table lists all the routing entries to route the packets to a specific destination. To view the 
IP forwarding configuration:

1. Select 

Network

 

>

 

Internet Protocol

 from the main tree menu.

2. Select the 

IP Forwarding 

tab. 

Use the Filtering Option to view the details displayed in the table.

3. The read-only 

IP Forwarding 

tab displays the current status between VLANs. To toggle the status of 

routing between VLANs, use the 

Enable/Disable

 options located at the bottom of the screen.

The following details are displayed in the table:

Destination Subnet

Displays the mask used for destination subnet entries. The Subnet Mask is the IP 
mask used to divide internet addresses into blocks (known as subnets). A value of 
255.255.255.0 will support 256 IP addresses.

Subnet Mask

Displays the mask used for destination subnet entries. The Subnet Mask is the IP 
mask used to divide internet addresses into blocks (known as subnets). A value of 
255.255.255.0 will support 256 IP addresses.

Gateway Address

Displays the IP address of the Gateway used to route the packets to the specified 
destination subnet. Do not set the gateway address to any VLAN interface used 
by the switch.

Interface

Displays the interface name with which the destination subnet entries are 
attached.

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RFS Series

3Com NBX 100 Release Note preview
NBX 100
Brand: 3Com Pages: 8
Cabletron Systems 3T01-04 User Manual preview
3T01-04
Brand: Cabletron Systems Pages: 52
FCI FLT93 Series Installation, Operation, Maintenance And Troubleshooting preview
FLT93 Series
Brand: FCI Pages: 12
ATEN KVMP CS1782A Quick Start Manual preview
KVMP CS1782A
Brand: ATEN Pages: 2
Allen-Bradley 105-C09 Series Installation Instruction preview
105-C09 Series
Brand: Allen-Bradley Pages: 2
Pathway connectivity solutions 6716 User Manual preview
6716
Brand: Pathway connectivity solutions Pages: 34
M-system SHSP Instruction Manual preview
SHSP
Brand: M-system Pages: 4
Jerguson SAS-16 Installation, Operation & Maintenance Instructions preview
SAS-16
Brand: Jerguson Pages: 4
Ormazabal velatia cgm.3 system General Instructions Manual preview
velatia cgm.3 system
Brand: Ormazabal Pages: 76
Black Box IDM-AP-100 User Manual preview
IDM-AP-100
Brand: Black Box Pages: 76
Omega Engineering LVU-230 User Manual preview
LVU-230
Brand: Omega Engineering Pages: 16
MiLAN MIL-S8TA User Manual preview
MIL-S8TA
Brand: MiLAN Pages: 13
ATEN CS-102U User Manual preview
CS-102U
Brand: ATEN Pages: 15
Tripp Lite B004-008 Owner'S Manual preview
B004-008
Brand: Tripp Lite Pages: 9
AMBIENTECH TONE-WS Series Installation Instructions preview
TONE-WS Series
Brand: AMBIENTECH Pages: 4
APG FT-100 Series Operator'S Manual preview
FT-100 Series
Brand: APG Pages: 7
Edge-Core Wedge-16X-AC Quick Start Manual preview
Wedge-16X-AC
Brand: Edge-Core Pages: 2
UniFi USW-24-POE Quick Start Manual preview
USW-24-POE
Brand: UniFi Pages: 13

Brands by name

Popular brands

Load more brands