5-66
Motorola RF Switch System Reference
5.8.3.1 Adding AP Location Information
1. To add AP Location information for your site: Select
Services
>
RTLS
from the main menu tree.
2. Select the
Site
tab.
3. Click the
Add
button.
5.8.4 Configuring SOLE Parameters
To configure the switch’s internal SOLE locationing engine:
1. .
Services
>
RTLS
from the main menu tree.
2. Select the
SOLE
tab.
3. Check the
Locate All Mobile-Units
checkbox to locate all MUs known to the switch across all WLANs.
This will also disable manual entry of MU MAC addresses in the field below.
This takes effect immediately when the box is checked.
4. Enter a value for the
MU Locate Interval
in seconds. The
MU Locate Interval
determines how often
the locationing of MUs is updated. The valid range for this is between 5 to 3600 seconds.
5. Click the
Apply
button to save the MU Locate Interval value.
Summary of Contents for RFS Series
