Motorola RFS Series System Reference Manual Download Page 75 | Manualshive

Page: 75 / 590

background image

Switch Information

3-19

3.2.3.1 Detailed Port Statistics

To view detailed statistics for a port:

1. Select a port from the table displayed within the

Statistics

screen.

2. Click the

Details

button.

3. The

Interface Statistics

screen displays. This screen displays the following statistics for the selected

port:

Name

Displays the port name.

MAC Address

Displays physical address information associated with the interface. This address
is read-only (hard-coded at the factory) and cannot be modified.

Input Bytes

Displays the number of bytes received on the interface.

Input Unicast
Packets

Displays the number of unicast packets (packets directed towards the interface)
received on the interface.

Input NonUnicast
Packets

Displays the number of NonUnicast Packets (Multicast and Broadcast Packets)
received on the interface.

Input Total Packets

Displays the total number of packets received on the interface.

Input Packets
Dropped

Displays the number of received packets dropped by the interface by the input
Queue of the hardware unit /software module associated with the VLAN. Packets
are dropped when the input Queue is full or unable to process incoming traffic.

Input Packets Error

Displays the number of packets with errors received on the interface. Input Packet
Errors are input errors due to: no buffer space/ignored packets due to broadcast
storms, packets larger than maximum packet size, framing errors, input rate
exceeding the receiver's date handling rate, or cyclic redundancy check errors. In
all of these cases, an error is reported and logged.

Output Bytes

Displays the number of bytes transmitted from the interface.

«
...
73
74
75
76
77
...
»

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for RFS Series

Brand: Camozzi Pages: 2

Brand: LevelOne Pages: 17

Brand: Sarowin Pages: 9

FlowPoint 2100 12

Brand: Cabletron Systems Pages: 36

Brand: Hawking Pages: 2

Brand: PABX Pages: 46

Brand: Davey Pages: 2

Brand: TESmart Pages: 12

Brand: AV-Box Pages: 11

Brand: DigitalZone Pages: 20

XGS-6350-12X8TR

Brand: Planet Pages: 16

LMP-2012G-SFP Series

Brand: ANTAIRA Pages: 2

Brand: Linksys Pages: 22

Brand: Comm-Tec Pages: 40

Brand: Grizzly Pages: 2

Cutler-Hammer NTV Series

Brand: Eaton Pages: 28

MAGTOP Snap 201

Brand: Bamo Pages: 2

B-520-MTRX-230-6x4+2

Brand: Binary Pages: 32

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands