Motorola RFS Series System Reference Manual Download Page 405

Page: 405 / 590

Switch Security

6-51

5. When all logging options have been modified, click the

Apply

button to commit those changes to the

switch.

6. To undo any changes and go back to the previously saved logging options, click the

Revert

button.

6.4.17 Reviewing Firewall and ACL Statistics

Use the

Statistics

tab to view set of statistics for

ACL

DHCP Snoop Entry

and

Role

based firewalls.

6.4.17.1 Reviewing ACL Statistics

To review ACL statistics:

1. Select

Security

Wireless

Firewall

from the main menu tree.

Multicast Log

The

Multicast Log

field displays the level of syslog logging enabled for excessive

multicast on an interface.

The logging level uses standard Syslog levels of:

• Emergency

• Alert

• Critical

• Error

• Warning

• Notice

• Info

• Debug

• None

To change the logging level, click on the specific field and choose the logging level
from the pull-down menu.

Unknown Unicast
Log

The

Unknown Unicast Log

field displays the level of syslog logging enabled for

excessive unknown unicasts on an interface. The logging level uses standard
Syslog levels of:

• Emergency

• Alert

• Critical

• Error

• Warning

• Notice

• Info

• Debug

• None

To change the logging level, click on the specific field and choose the logging level
from the pull-down menu.

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RFS Series

Reviews:

Related manuals for RFS Series

Brands by name

Popular brands

Motorola RFS Series, System Reference Manual

Search results

Summary of Contents for RFS Series

Reviews:

Related manuals for RFS Series

Brands by name

Popular brands