Motorola RFS Series System Reference Manual Download Page 408

Page: 408 / 590

6-54

Motorola RF Switch System Reference Guide

4. Refer to the following information as displayed within the

DHCP Snoop Entry

tab:

6.4.17.3 Viewing Role Based Firewall Statistics

The Role Based Firewall statistics information displays a list of mobile units associated with each role name.

To review Role Based Firewall statistics:

1. Select

Security

Wireless

Firewall

from the main menu tree.

2. Click the

Statistics

tab.

Client IP Address

Displays the DHCP Client IP Address for each entry.

VLAN ID

Displays the VLAN ID number, if any, for each entry in the DHCP Snoop Entry table.
The range is <1-4094>. The default value is 1.

MAC Address

Displays the MAC Address of each DHCP Client, DHCP Server or Router in the
table.

Type

Displays the type for each DHCP Snoop Entry. Available entry types are:

• DHCP Client

• DHCP Server

• Router

• DHCP Server Router

• DHCP Client Router

Lease Time

Displays the DHCP remaining Lease Time for each entry in the table.

MU Port

Displays the MU port number for each entry in the table.

Summary of Contents for RFS Series















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RFS Series

Reviews:

Related manuals for RFS Series

Brands by name

Popular brands

Motorola RFS Series, System Reference Manual

Search results

Summary of Contents for RFS Series

Reviews:

Related manuals for RFS Series

Brands by name

Popular brands