Molecular Devices FLIPR Tetra, User Manual

Page: 62 / 302

ScreenWorks Software Overview
62 0112-0109 H
Plate Process Definition
All plates currently in the system are listed in the Plate Process
Definition dialog, opened from Tools > Plate Library . They are
categorized first into read and source plates and then by well-number
format.
A description of commands in the Plate Process Definition and Define
Camera Parameters, both accessed via Tools > Plate Library is
provided below. For instructions on adding a new read or source plate,
see Appendix B: Data Processing Algorithms on page 273 . The Plate
Library is camera-specific, so if any plates are added with one camera
type, they will not be available once the camera type is changed.
The
Plate Process Definition dialog box is accessible only to
administrators, and is password protected. The default user name is
fliprtetra and password is flipr .
Fifteen default plates are included with the system software:
• Default 96
• Default 96 small volume
• Default 96 no slit mask
• Default 96 boat
• Default 384
• Default 384 small volume 5X3 mask
• Default 384 small volume 3X3 mask
• Default 384 boat
• Default 384 blot
• Default 1536
• Default 1536 boat
• Default 1536 blot
• Default Cell Reservoir 96
Open Error Log Opens an error log generated by the FLIPR
®
Tetra
System. This feature is for technical support and
requires a password.
Save Error Log
Save error logs. Logs are saved as * .fel (FLIPR
®
System
Error Log) encrypted files. The files can be
forwarded to Molecular Devices Technical Support.
Assay Log For data files only, opens a dialog reporting when the
protocol steps were applied.
Note: This log can be accessed by selecting
Ctrl+Shift+A .
Item Description