Molecular Devices FLIPR Tetra, User Manual

Page: 220 / 302

Troubleshooting
220 0112-0109 H
222: “Unable to unload plate.
Plate already detected at landing
pad.”
Plate already present
on landing pad.
Remove plate on
landing pad prior to
unloading a new
plate.
223: “Unable to unload plate. No
plate detected at requested
position.”
No plate present in
position.
Clear error and
proceed with
experiment.
Plate may have
popped out of
position.
Clear plate that is
out of position prior
to resuming
experiment.
Bar code reader misreads the
bar code and file name reads
“Bad_bar_code”.
Misplacement of bar
code or incorrect
type of bar code.
Bar code must be on
the side of the plate
where the bar code
is reading. Place
label as low as
possible. Use labels
with numbers on top.
Table 9-10 Troubleshooting Robotic Integration (cont’d)
Symptom or Error
Message
Possible Causes Solutions