Molecular Devices FLIPR Tetra, User Manual

Page: 101 / 302

FLIPR
®
Tetra High Throughput Cellular Screening System User Guide
0112-0109 H 101
Export Time Sequence
Configure parameters for export of time-sequence data in this tab. The
exported files contain a value for every read interval for each well, for
the read mode or ratio selected. This contrasts with the Statistics file,
which contains one kinetic reduction per well. The table below describes
the settings and options of this dialog box:
Item Description
Enable Time
Sequence
Check this option to have a time sequence export file
created.
File Name Options Choose a name for the exported time sequence file.
Use name of data file —When checked, export files
automatically take the data or protocol file name, with
*.seq n extension, where n is an integer  1.
Use user-defined name —Enter your own name for the
export files (maximum of 25 characters). Files are given
*.seq n extension, where n is an integer  1.
Data Format Format the output from this group of options:
Show Labels— Check to include information about the
processing options selected (for example , name of *.fmd
file and well labels). Any corrections prior to export ( e.g.,
negative control correction) are reported at the top of the
exported ASCII file.
Order of Well Data— Order the data by column (for
example , A1, A2, A3) or by row (for example , A1, B1,
C1). Set this option in accordance to the way your
spreadsheet or database handles well data.
Order Time Data— Select vertical or horizontal ordering
of the data.
Misc. Parameters Select experimental parameters and group statistics to
export with the data.