Molecular Devices FLIPR Tetra, User Manual

Page: 67 / 302

FLIPR
®
Tetra High Throughput Cellular Screening System User Guide
0112-0109 H 67
Chiller Status Indicates whether the status of the chiller.
Read Plate Reports when a plate is present in Position 3 (Read Plate
position).
Source Plate 1 Reports when a plate is present in Position 1 (Source
Plate 1 or Tip Loading position).
Source Plate 2 Reports when a plate is present in Position 2 (Source
Plate 2).
Source Plate 3 Reports when a plate is present in Position 4 (Source
Plate 3 or Cell Reservoir).
Cell Reservoir Indicates when the Cell Reservoir is installed.
Chiller Temp (°C) Reports the current temperature in the chiller.
Fill Bottle A Reports when fill bottle A is empty of wash solution.
Fill Bottle B Reports when bottle B is empty of wash solution.
Waste Bottle A Reports when waste bottle A is full.
Waste Bottle B Reports when waste bottle B is full.
Mode Reports whether ScreenWorks Software in Manual or
Remote mode.
Cell Flask Rate Reports the set stir rate of the cell flask. If the Cell
Suspension option is installed and the stir rate is 0, an
exclamation sign is displayed.
Chiller Setpoint (°C) Reports the set point from the chiller.
Fluid 1
Reports the last known state of the Fluid 1 bottle. At boot
up the state will be Unknown until that Fluid is used.
Fluid 2 Reports the last known state of the Fluid 2 bottle. At boot
up the state will be Unknown until that Fluid is used.
Fluid 3 Reports the last known state of the Fluid 3 bottle. At boot
up the state will be Unknown until that Fluid is used.
Fluid 4 Reports the last known state of the Fluid 4 bottle. At boot
up the state will be Unknown until that Fluid is used.
Cell Flask Reports the last known state of the stir Cell Flask. At
boot up the state will be Unknown until the Cell Flask is
used.
Item Description