Molecular Devices FLIPR Tetra, User Manual

Page: 269 / 302

FLIPR
®
Tetra High Throughput Cellular Screening System User Guide
0112-0109 H 269
E112 Door(s) are opened. Close the doors before start your
experiment.
E113 Load Tips position not checked! Check Load Tips position for auto
load tips or manually load tips before running experiment.
E114 The chamber temperature is not in range.
E115 Experiment wash tips and there is no tip washer.
E116 Bottle A is empty! Refill it or use another bottle.
E117 Bottle B is empty! Refill it or use another bottle.
E118 Waste bottle A is full. Please empty the bottle to continue.
E119 Waste bottle B is full. Please empty the bottle to continue.
E120 Remove plates redundant.
E121 Error relate to the data folder. The path is not valid, or cannot be
accessed. Or there are not enough disk space.
E122 Error relate to the export folder. The path is not valid, or cannot
be accessed. Or there are not enough disk space.
E123 The read interval is too short. Please check settings in Read
views.
E124 Invalid aspirate parameters [in the protocol].
E125 Invalid dispense parameters [in the protocol].
E126 The wash tips parameters are invalid.
E127 Invalid fluid bottle specified in wash tips process.
E128 Invalid Read Mode configuration. You tried to take fluorescence
(with excitation) and luminescence (without excitation) reading in
one protocol. This is not allowed.
E129 Invalid Read Mode configuration. Camera gain or gate time is out
of range. Please check your protocol settings.
E130 The protocol has transfer cells and/or wash Cell Reservoir
operations even though the Cell Reservoir is not installed.
E131 Cell Reservoir is not ready.
E132 Cell flask spinning rate could not be set. Please check your
instrument status.
Table A-4 runexperiment command errors (cont’d)
Error
Code
Description