Mitsubishi Electric MELSEC-L LD75D, User Manual

Page: 684 / 818

682
APPENDICES
Appendix 1
Function Update
Appendix 1.1
Function comparison
This section describes the function comparison of the LD75 and an additional buffer memory area.
(1) Function comparison
*1 GX Configurator-QP does not support these functions. Only GX Works2 (Version 1.540N or later) supports the functions.
(2) Additional buffer memory area
*1 The listed buffer memory addresses are those of the positioning data No. 1 of each axis. For the buffer memory
addresses of the other positioning data numbers, refer to Positioning Data (No.1 to 600) List of Buffer Memory
Addresses (
 Page 693, Appendix 3).
Item First five digits of the LD75 serial number Reference
Output timing selection of near pass control "14092" or later Page 527, Section 12.3.4
3-axis helical interpolation control
*1
"17102" or later
Page 402, Section 9.2.12
Page 408, Section 9.2.13
Positioning option
*1
"17102" or later Page 152, Section 5.3
Buffer memory address Name Relevant function
1934 Output timing selection of near pass control Output timing selection of near pass control
140 Positioning option valid/invalid setting
Positioning option
2003 (Axis 1)
8003 (Axis 2)
14003 (Axis 3)
20003 (Axis 4)
M code ON signal output timing
ABS direction in degrees
Interpolation speed designation method