Mitsubishi Electric MELSEC-L LD75D, User Manual

Page: 231 / 818

229
CHAPTER 5 DATA USED FOR POSITIONING CONTROL
5
5.
7
List
of
Cont
rol D
a
ta
(27)[Cd.29] Target position change request flag
(28)[Cd.30] Simultaneous starting axis start data No. (axis 1 start data No.)
Item Description
Setting details Requests the target position change during a positioning operation.
Setting value
■ Set with a decimal.
Default value 0
Storage buffer memory
address
Axis 1: 1538
Axis 2: 1638
Axis 3: 1738
Axis 4: 1838
Item Description
Setting details
• Use these data items to specify a start data No. for each axis that has to start simultaneously.
• Set "0" to any axis that should not start simultaneously.
Setting value
■ Set with a decimal.
Default value 0
Storage buffer memory
address
Axis 1: 1540
Axis 2: 1640
Axis 3: 1740
Axis 4: 1840
Setting
value
K 1
1: Requests a target position change
Target position change request flag
The LD75 resets the value to "0" automatically
when the new target position value has been written.
(This indicates the completion of target position change request.)
Setting
value
K
Cd.30 to Cd.33
1 to 600
Simultaneous starting
axis start data No.: