Mitsubishi Electric MELSEC-L LD75D, User Manual

Page: 187 / 818

185
CHAPTER 5 DATA USED FOR POSITIONING CONTROL
5
5.
6
List
of
M
o
nit
o
r
Dat
a
(c) [Md.50] Start (Year:month)
(d) [Md.5] Start (Day:hour)
(e) [Md.6] Start (Minute:second)
If a start signal is issued against an operating axis, a record relating to this event may be output before a record relating to an
earlier start signal is output.
Item Description
Storage details The starting time (Year:month) is stored.
Reading the monitor
value
■
Monitoring is carried out with a hexadecimal display.
Default value 0000H
Storage buffer memory
address
(Common to axes 1 to 4)
For details on the storage buffer memory, refer to the following.

Page 183, Section 5.6.1 (2)
Item Description
Storage details The starting time (Day:hour) is stored.
Reading the monitor
value
■ Monitoring is carried out with a hexadecimal display.
Default value 0000H
Storage buffer memory
address
(Common to axes 1 to 4)
For details on the storage buffer memory, refer to the following.

Page 183, Section 5.6.1 (2)
Item Description
Storage details The starting time (Minute: second) is stored.
Reading the monitor
value
■
Monitoring is carried out with a hexadecimal display.
Default value 0000H
Storage buffer memory
address
(Common to axes 1 to 4)
For details on the storage buffer memory, refer to the following.
 Page 183, Section 5.6.1 (2)
Buffer memory (stored with BCD code)
Monitor value
0 to 9 0 to 9 0 to 1 0 to 9
00 to 99 (year) 01 to 12 (month)
b15 b12 b8 b4 b0
Buffer memory (stored with BCD code)
Monitor value
8 2 1 5
0 to 2 0 to 3
0 0 1 0 1 0 0 0 0 0 0 1 0 1 0 1
8 1 5 2
0 to 3 0 to 9
01 to 31 (day) 00 to 23 (hour)
0 to 5
00 to 59 (second)
0
b15 b12
1 0 0 1 0 0 1 0 0 0 0 0 1 1 1
b8 b4 b0
9 0 7 4
Buffer memory (stored with BCD code)
0 to 5 0 to 9
00 to 59 (minute)
0 to 9
Monitor value
9 4 0 7