Mitsubishi Electric MELSEC-L LD75D, User Manual

Page: 213 / 818

211
CHAPTER 5 DATA USED FOR POSITIONING CONTROL
5
5.
7
List
of
Cont
rol D
a
ta
5.7
List of Control Data
5.7.1
System control data
(1) [Cd.1] Flash ROM write request
(2) [Cd.2] Parameter initialization request
Item Description
Setting details Requests writing of data from the buffer memory to the flash ROM. (Parameters, positioning data, and block start data)
Setting value
■ Set with a decimal.
Default value 0
Storage buffer memory
address
(Common to axes 1 to 4)
1900
Item Description
Setting details
Requests initialization of setting data.
Initialization

Resetting of setting data to default values
Note) After completing the initialization of setting data, reset the CPU module or reboot the power for the programmable controller.
Initialized setting data
• Parameters ([Pr.1] to [Pr.57], [Pr.150])
• Positioning data (No.1 to No.600)
• Block start data (No.7000 to 7004)
Setting value
■
Set with a decimal.
Default value 0
Storage buffer memory
address
(Common to axes 1 to 4)
1901
K 1
Setting
value
1: Requests write access
to flash ROM.
Flash ROM write request
The LD75 resets the value to "0" automatically
when the write access completes.
(This indicates the completion of write operation.)
K 1
Setting
value
1: Requests parameter
initialization.
Parameter initialization request
The LD75 resets the value to "0" automatically
when the initialization completes.
(This indicates the completion of parameter)