Mitsubishi Electric MELSEC-L LD75D, User Manual

Page: 476 / 818

474
(4) Multiple axes simultaneous start control function setting method
The following shows the setting of the data used to execute the multiple axes simultaneous start control with
positioning start signals. (The axis control data on the start axis is set.)
Refer to

Page 211, Section 5.7 for information on the setting details.
(5) Setting examples
The following shows the setting examples in which the axis 1 is used as the start axis and the simultaneously
started axes are used as the axes 2 and 4.
● The "multiple axes simultaneous start control" carries out an operation equivalent to the "simultaneous start" using the
"block start data".
●
The setting of the "multiple axes simultaneous start control" is easier than that of the "simultaneous start" using the "block
start data".
• Setting items for "simultaneous start" using "block start data": Positioning start data, block start data, condition
data, and positioning data
• Setting items for "multiple axes simultaneous start control": Positioning data and axis control data
Setting item
Setting
value
Setting details
Buffer memory address
Axis 1 Axis 2 Axis 3 Axis 4
[Cd.3] Positioning start No. 9004
Set the multiple axes simultaneous start control
start No. "9004".
1500 1600 1700 1800
[Cd.30]
Simultaneous starting axis start
data No. (Axis 1 start data No.)
Set the simultaneously started axis start data No.
Set a "0" for the axis other than the simultaneously started
axes.
1540 1640 1740 1840
[Cd.31]
Simultaneous starting axis start
data No. (Axis 2 start data No.)
1541 1641 1741 1841
[Cd.32]
Simultaneous starting axis start
data No. (Axis 3 start data No.)
1542 1642 1742 1842
[Cd.33]
Simultaneous starting axis start
data No. (Axis 4 start data No.)
1543 1643 1743 1843
Setting item
Setting
value
Setting details
Buffer memory
address (Axis 1)
[Cd.3] Positioning start No. 9004
Set the multiple axes simultaneous start control start No.
"9004".
1500
[Cd.30]
Simultaneous starting axis start
data No. (Axis 1 start data No.)
100 The axis 1 starts the positioning data No. 100. 1540
[Cd.31]
Simultaneous starting axis start
data No. (Axis 2 start data No.)
200
Immediately after the start of the axis 1, the axis 2 starts the
axis 2 positioning data No. 200.
1541
[Cd.32]
Simultaneous starting axis start
data No. (Axis 3 start data No.)
0 Will not start simultaneously. 1542
[Cd.33]
Simultaneous starting axis start
data No. (Axis 4 start data No.)
300
Immediately after the start of the axis 1, the axis 4 starts the
axis 4 positioning data No. 300.
1543