9-6
The priority of RR source is (from high to low): CO
2
measurement and impedance respiration
measurement.
The [
RR Source
] settings of Resp and CO
2
are linked.
The RR source options and description are shown in the table below.
Option
Description
Auto
RR source is automatically selected according to the priority.
CO
2
RR source is from CO
2
measurement.
ECG
RR source is from impedance respiration measurement.
9.10 Setting Alarm Properties
Select [
Alarm Setup >>
] from the [
Resp Setup
] menu. In the popup menu, you can set
alarm properties for this parameter.
9.11 Switching Resp Measurement On/Off
To switch Resp measurement on, select [
Imped. Resp Measure. ON
] from the [
Resp Setup
]
menu. To switch Resp measurement off, select [
Imped. Resp Measure. OFF
] from the
[
Resp Setup
] menu and then select [
Yes
] from the popup dialog box. Then, a line is
displayed in the waveform area and no numeric but [
Measurement OFF
] message is
displayed in the parameter area.
Summary of Contents for uMEC10
