Mindray uMEC10, Operator'S Manual

Page: 188 / 288

21-2
21.3 Setting Up the Printer
To set the printer’s properties, select [ Main Menu ]
ė
[ Print Setup >> ]
ė
[ Printer Setup >> ].
In the [ Printer Setup ] menu, you can:
„
Select a connected printer
Select [
Printer
] and then select a connected printer as the monitor’s printer.
„
Search for a printer
If your selected printer is not in the list or a new printer is added into the network, you
can select the [ Search Printer ] to re-search for all printers in the network.
„
Set up the paper
Select [
Paper Size
] and toggle between [
A4
] and [
Letter
].
21.4 Starting Report Printouts
Reports Contents Procedures
ECG reports ECG waveforms and
relevant parameter values
Select [ Main Menu ][ Print Setup >> ][ ECG
Reports >> ][ Print ]
Tabular
trends
Depend on the selected
parameter group, resolution
and time period
Select [
Main Menu
][
Print Setup >>
]
[ Tabular Trends Reports >> ][ Print ], or
select [
Main Menu
][
Review >>
][
Tabular
Trends ] [ Print ][ Print ]
Graphic
trends
Depend on the selected
parameter group, resolution
and time period
Select [
Main Menu
][
Print Setup >>
]
[ Graphic Trends Reports >>] [ Print ], or
select [
Main Menu
][
Review >>
][
Graphic
Trends ] [ Print ][ Print ]
Parameter
alarm review
Depend on the selected
alarms
Select [ Main Menu ][ Review >> ][ Alarms ]
[
Print
]
Realtime
waves
Depend on the selected
waveforms
Select [ Main Menu ][ Print Setup >> ]
[
Realtime Reports >>
][
Print
]
21.5 Stopping Reports Printouts
To stop report printouts, select [ Main Menu ]
ė
[ Print Setup >> ]
ė
[ Stop All Reports ].