Mindray uMEC10, Operator'S Manual

Page: 86 / 288

7-14
You can also temporarily prolong the alarm pause time after the monitor entersthe alarm
paused status:
1. Select [ Main Menu ]
ė
[ Maintenance >> ]
ė
[ User Maintenance >> ]
ė
enter the
required password ė [
Alarm Setup >>
].
2. In the [ Alarm Setup ] menu, set the [ Max. Alarm Pause 15min ] to [ Enable ].
3. In the physiological alarm area, select a proper time in the [
Alarm Pause Time
] menu.
7.7 Switching Off All Alarms
If [ Alarm Pause Time ] is set to [ Permanent ], the patient monitor enters into the alarm off
status after the hardkey is pressed. During the alarm off status,
„
As for physiological alarms, no alarm lamps flash and no alarms are sounded.
„
As for physiological alarms, no numeric and alarm limit flash.
„
No physiological alarm messages are shown.
„
[ Alarm Off ] is displayed in the physiological alarm area with red background.
„
As for technical alarms, no alarms are sounded.
„
The alarm off symbol is displayed in the alarm symbol area.
You can cancel the alarm off status by pressing the hardkey.
WARNING
z
Pausing or switching off alarms may result in a hazard to the patient. Please be
very careful.
NOTE
z
[Max. Alarm Pause 15min] is configured to [Disable] by default. In this case, you
cannot prolong the pause time.The prolonged pause time is only effective to the
current paused alarms.