Mindray uMEC10, Operator'S Manual

Page: 153 / 288

15-3
NOTE
z
The above picture is connecting illustration when TI sensor PN 6000-10-02079 is
used. The connection may be different if other TI sensors are used.
3. Select the C.O. parameter window to enter the [ C.O. Setup ] menu. Check if the height
and weight are appropriate for your patient. Change if necessary.
4. In the [
C.O. Setup
] menu:
‹
Check that the correct computation constant is entered. Refer to the Instruction for
Use of pulmonary artery catheter to determine the [
Comp. Const
] according to the
entered injectate volume and temperature. To change the computation constant,
select [
Comp. Const
] and then enter the correct value. When a new catheter is used,
the computation constant should be adjusted in accordance with the manufacturer’s
instructions for use.
‹
Set the [ Auto TI ] to [ Manual ] or [ Auto ]. If you select [ Auto ], the system
automatically detects the injectate temperature, and the [
Manual TI
] is disabled. If
you select [ Manual ], you need to enter the injectate temperature at [ Manual TI ]
manually.
‹
Set the [ Measuring Mode ] to [ Manual ] or [ Auto ]. In [ Auto ] mode, the monitor
automatically takes C.O. measurement after establishing a baseline blood
Patient monitor
C.O. cable
Injectate
Syringe
In-line probe
PA catheter
Balloon inflation port
Ice water
Stopcock
Hole