Mindray uMEC10, Operator'S Manual

Page: 70 / 288

6-6
The [ View Other Patient ] window covers the lower part of the waveform area and consists
of:
(1) Information Area: shows the patient information (including department, bed number,
patient name, etc.), network status symbol.
(2) View Area: shows physiological waveforms and parameters. You can switch a
waveform area to a parameter area by selecting your desired waveform area and then
selecting [ Switch to Parameter Area ], or switch a parameter area to a waveform area
by selecting your desired parameter area and then selecting [
Switch to Waveform
Area ].
(3) Care Group Overview Bar.
(4) Message Area: shows physiological, technical and prompt messages from the currently
viewed patient monitor. By selecting this area, you can enter the [
Alarm Information
List ] to view all physiological, technical and prompt messages coming from the
currently viewed patient.
(5) [ Alarm Reset ] button
‹
When [ Reset Other Bed’s Alarms ] is set to [ On ] in [ Maintenance ]
ė
[ User
Maintenance
] ė [
Alarm Setup
], the [
Alarm Reset
] button appears on the [
View
Other Patient ] window. You can reset the alarm system for the selected monitor by
pressing the button. Refer to
7.11.3 Resetting Care Group Alarms
for details.
‹
When [ Reset Other Bed’s Alarms ] is set to [ Off ], there is no button appearing on
the [
View Other Patient
] window.
Additionally, you can change a waveform or parameter for viewing
„
To change a waveform for viewing, select the waveform segment where you want a new
waveform to appear and then select the waveform you want from the popup menu.
„
To change a parameter for viewing, select the parameter window where you want a new
parameter to appear and then select the parameter you want from the popup menu.
WARNING
z
The data presented in the [View Other Patient] window have delay. Do not rely on
this window for realtime data.