Mindray uMEC10, Operator'S Manual

Page: 53 / 288

4-3
4.2.2 Manually Admitting a Patient
To manually admit a patient:
1. Select the [
Patient Setup
] QuickKey, or [
Main Menu
][
Patient Setup >>
].
2. Select [ Admit Patient] or [ Quick Admit ].
‹
[
Admit Patient] to
fully admit a patient so that you can clearly identify your
patient, on recordings, reports and networking devices.
‹
[ Quick Admit ] if you do not have the time or information to fully admit a patient.
Complete the rest of the patient demographic details later. Otherwise, the
symbol will always be displayed in the patient information area.
3. If a patient has been admitted at present, select [
OK
] to discharge the current patient.
If .no patient is admitted, you can choose either:
‹
[
Yes
] to apply the data in your patient monitor to the new patient, or
‹
[ No ] to clear any previous patient data .
4.3 Managing Patient Information
4.3.1 Editing Patient Information
To edit the patient information after a patient has been admitted, or when the patient
information is incomplete, or when you want to change the patient information:
1. Select the [ Patient Setup ] QuickKey, or [ Main Menu ][ Patient Setup >> ].
2. Select [
Patient Demographics
] and then make the required changes.
3. Select [ Ok ].
4.3.2 Querying and Obtaining Patient Information
The monitor can obtain patient information from HIS through eGateway. To query or obtain
patient information from HIS,
1. Select [ Main Menu]
ė
[ Maintenance >> ]
ė
[ User Maintenance >> ]
ė
enter the
required password
ė
[ Network Setup >> ]
ė
[ Gateway Comm Setup >> ], and set [ IP
Address ] and [ Port ]. Set [ ADT Query ] to [ On ].
2. Click patient information area to enter the [ Patient Demographics ] menu.
3. Select [
Obtain Patient Info. >>
] to enter the [
Obtain Patient Information
] menu.
4. Input query condition and then select [ Query ]. The monitor will display the obtained
patient information.