Mindray uMEC10, Operator'S Manual

Page: 196 / 288

22-4
NOTE
z
If no setting is selected from [Alm Lev] or [Alarm Cat.], no nurse call signal will be
triggered whatever alarms occur.
22.5 Network Connection
22.5.1 Selecting a Network Type
The patient monitor supports both wired and wireless network. To set the monitor network:
8. Select [ Main Menu ]
ė
[ Maintenance>> ]
ė
[ User Maintenance>> ]
ė
enter the required
password
ė
[ Network Setup >> ]
ė
[ Monitor Network Setup >> ].
9. Set [ Network Type ] to [ LAN ] or [ Wireless AP ].
22.5.2 Setting the Wired Network
1. Select [
Main Menu
] ė [
Maintenance>>
] ė [
User Maintenance>>
] ė enter the required
password
ė
[ Network Setup >> ]
ė
[ Monitor Network Setup >> ].
2. Set [
Network Type
] to [
LAN
].
3. Set [ Address Type ].
‹
[
DHCP
]: the monitor can automatically acquire network parameters.
‹
[ Manual ]: you need to manually input the monitor IP address, subnet mask and
gateway address.
22.5.3 Setting the Wireless Network
The patient monitors can be connected to a wireless network via a built-in Wi-Fi module.
To set the wireless network:
1. Select [ Main Menu ]
ė
[ Maintenance>> ]
ė
[ User Maintenance>> ]
ė
enter the required
password ė [
Network Setup >>
] ė [
Monitor Network Setup >>
].
2. Set [ Network Type ] to [ Wireless AP ].
3. Select [ Ok ]
ė
[ WLAN Setup >> ] to access the [ WLAN Setup ] menu.
‹
Select [ WLAN Band ] to [ 5G ] or [ 2.4G ] according to the band you are using. The
deault is [ Auto ], which means the monitor can automatically identify the WLAN
band.