Mindray uMEC10, Operator'S Manual

Page: 79 / 288

7-7
7.4.5 Setting the Reminder Tones
When the alarm volume is set to zero, or the alarm tone is reset or switched off, the patient
monitor issues a periodical reminder tone. To set the reminder tones:
1. Select [ Main Menu ][ Maintenance >> ][ User Maintenance >> ]enter the
required password.
2. Select [ Alarm Setup >> ] to enter the [ Alarm Setup ] menu.
3. Set the [
Reminder Tones
] to [
On
], [
Off
] or [
Re-alarm
]. When [
Re-alarm
] is selected,
the current physiological alarms and technical alarms marked with “
Ĝ
” will be
re-generated after the [
Reminder Interval
] if the alarm condition persists.
To set the interval between reminder tones, select [
Reminder Interval
] and toggle between
[ 1min ], [ 2min ] and [ 3min ].
In addition, you can set the volume of alarm reminder tones. To set the volume of alarm
reminder tones, select [ Main Menu ][ Alarm Setup >> ][ Others ] or the [ Alarm Setup ]
QuickKey[ Others ]. Then, select [ Reminder Vol ] and toggle between [ High ], [ Medium ]
and [ Low ].
7.5 Understanding the Alarm Setup Menu
Select the [ Alarm Setup ] QuickKey or [ Main Menu ][ Alarm Setup >> ] to enter the
[ Alarm Setup ], where you can:
„
Set alarm properties for all parameters.
„
Change ST alarm settings.
„
Change arrhythmia alarm settings.
„
Set the threshold for some arrhythmia alarms.
„
Change other settings.