Lexmark Pro5500 Series, Service Manual

Page: 256 / 277

5-2
Service Manual
4447-20x
Go Back
Previous
Next
Front view
Number Use the To
1 Automatic Document Feeder (ADF) • Scan, copy, or fax multiple-page documents.
• Access ADF paper jams.
Note: Select printer models allow duplex scanning,
copying, or faxing with just a single pass of a page
through the ADF.
2 ADF input tray Load original documents into the ADF.
Notes:
• Do not load postcards, photos, small items, or
thin media (such as magazine clippings) into
the ADF. Place these items on the scanner
glass.
• After scanning, copying, or faxing, you can lift
the right end of the input tray to retrieve the
original documents easily.
3 PictBridge and USB port Connect a PictBridge-enabled digital camera or a
flash drive to the printer.
4 Card reader light Check the card reader status. The light comes on
when a memory card is inserted, and blinks when a
memory card is being accessed.
5 Memory card slot Insert a memory card.
6 Ink cartridge access door Install, remove, or replace ink cartridges.
7 Paper tray (Tray 1) Load paper.
8 Second paper tray (Tray 2)
Note: This option is available only to
select printer models.
Load additional paper.
You can load the same type of paper as in Tray 1.
You can also load a different type of paper and
change the default paper settings so the printer
uses paper from Tray 2 for certain types of print
jobs.
9 Exit bin Hold paper as it exits.
Note: For the printer to be ready for any print job,
make sure to fully extend the exit bin, and to flip out
the bin extender.
1
2
3
4
6
9
7
8
10
11
SD/MS/x
D/MMC
5