Lenze i950 Series, Manual

Page: 39 / 500

5.4.1 Select motor from motor catalogue
The following describes how to parameterise your drive system by selecting a Lenze motor
from the motor catalogue. Several processes are started invisibly in the background to load/
calculate the settings for the relevant parameters.
Preconditions
•
Access to a Lenze engineering tool (e. g. »EASY Starter«).
•
Parameters can be set online or offline (with or without connected motor).
Required steps
1. Open the Lenze engineering tool that provides for the functionality of a “Motor catalogue".
2. Click the Select motor... button. In case of the »EASY Starter«, you find the Select motor...
button on the "settings". tab.
3. Select the used motor in the "Select motor" dialog:
By entering filter criteria, you can restrict the selection.
Name (e. g. "MCS..."), rated power and C86 value can be found on the motor
nameplate.
4. Press the Please select button to select the thermal sensor.
This is not required for all motors. For older motors, such as MDSKA056-22 (C86=10), a ther-
mal sensor CANNOT be selected.
Observe the notes on the ? button.
5. Click the OK button to start the optimisation.
Basic setting
Motor data
Select motor from motor catalogue
39