Lenovo ThinkServer TD200, Hardware Maintenance Manual

Page: 309 / 346

Configuration Wizard Select this to start the Configuration Wizard
and create a new storage configuration, clear a
configuration, or add a new configuration.
Adapter Selection From this view, you can select a different SAS
adapter. Then, you can view information about the
and the drives connected to it, or create a new
configuration for the adapter.
Physical View or Logical View Select this to toggle between the Physical View and
Logical View.
Events From this view, you can display the system events
in the Event Information page.
Exit
Select this to exit the WebBIOS utility and continue
with the system boot.
Creating a storage configuration using the Configuration Wizard
Follow these steps to start create a storage configuration:
1. Click Configuration Wizard to start the wizard.
2. Select a configuration option:
Attention: If you select Clear Configuration or New Configuration , all existing data in the configuration
is deleted. Make a backup copy of any data that you want to keep before selecting these options.
Clear Configuration Clears the existing configuration.
New Configuration Clears the existing configuration and lets you
create a new configuration.
Add Configuration Retains the existing storage configuration and
adds new drives to it (this does not cause any
data loss).
3. Click Next .
4. Select a configuration mode from the following options:
Custom Configuration In this mode, you can control all attributes of the
new storage configuration.
Auto Configuration and Redundancy
This mode automatically creates an optimal
RAID 1 or RAID 5 configuration, providing data
redundancy.
Auto Configuration without Redundancy This mode automatically creates a non-redundant
RAID 0 configuration.
5. Click Next to continue.
Viewing and changing properties
You can view information for one LSI SAS at a time. If your system has multiple LSI SAS adapters, you can
view information for a different adapter, click
Adapter Selection on the main view. To view the properties for
the currently selected adapter, click Adapter Properties on the main WebBIOS screen.
Chapter 9
.
Configuring the server
301