Lenovo ThinkServer TD200 Hardware Maintenance Manual Download Page 263

Page: 263 / 346

Connecting external devices

If you install a supported optional adapter, you can attach external devices to the server.

To attach an external device, complete the following steps:

1. Read the safety information (see Chapter 2 “Safety information” on page 3) as well as the documentation

that comes with the device.

2. Turn off the server and all attached devices.

3. Follow the instructions that come with the device to prepare it for installation and to connect it to the

server.

Chapter 7

Installing and replacing FRUs

255

Summary of Contents for ThinkServer TD200



























































































































































































































































































































































Search results

Summary of Contents for ThinkServer TD200

Reviews:

Related manuals for ThinkServer TD200

Brands by name

Popular brands

Lenovo ThinkServer TD200, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TD200

Reviews:

Related manuals for ThinkServer TD200

Brands by name

Popular brands