Lenovo ThinkServer TD200, Hardware Maintenance Manual

Page: 58 / 346

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Chapter 8 “Parts listing, TD200 Machine Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836” on page
257 to determine which components are customer replaceable units (CRU) and which components are
field replaceable units (FRU).
• If an action step is preceded by “(Trained service technician only),” that step must be performed only by
a trained service technician.
ENET[0] IP-Cfg:HstName=%1,
IP@%2, NetMsk=%3,
GW@=%4.(%1 =
CIM_DNSProtocolEndpoint.Hostname;
%2 =
CIM_StaticIPSettingData.IPv4Address;
%3 =
CIM_StaticIPSettingData.SubnetMask;
%4 =
CIM_StaticIPSettingData.DefaultGatewayAddress) Info An IMM IP address and
configuration have been
assigned using client data. No action; information only.
LAN: Ethernet[0] interface is no
longer active. Info The IMM Ethernet interface
has been disabled. No action; information only.
LAN: Ethernet[0] interface is now
active. Info The IMM Ethernet interface
has been enabled. No action; information only.
DHCP setting changed to by user
%1.(%1 = user ID) Info A user has changed the
DHCP mode. No action; information only.
IMM: Configuration %1
restored from a configuration
file by user %2.(%1 =
CIM_ConfigurationData.ConfigurationName;
%2 = user ID) Info
A user has restored the IMM
configuration by importing a
configuration file.
No action; information only.
Watchdog %1 Screen Capture
Occurred.(%1 = OS Watchdog or
Loader Watchdog) Error An operating-system error
has occurred, and the screen
capture was successful. 1. Reconfigure the watchdog
timer to a higher value.
2. Make sure that the IMM
Ethernet over USB interface is
enabled.
3. Reinstall the RNDIS or
cdc_ether device driver for the
operating system.
4. Disable the watchdog.
5. Check the integrity of the
installed operating system.
50
ThinkServer TD200 Hardware Maintenance Manual