Lenovo ThinkServer TD200 Hardware Maintenance Manual Download Page 174

Page: 174 / 346

Installing a DVD drive

To install a DVD drive, complete the following steps:

1. If you are replacing a drive, make sure that:

• You have all the cables and other equipment that are specified in the documentation that comes

with the new drive.

• You have checked the instructions that come with the new drive to determine whether you must set

any switches or jumpers in the drive.

• You have removed the blue optical drive rails from the side of the old drive and have them available for

installation on the new drive.

Note:

If you are installing a drive that contains a laser, observe the following safety precaution.

Statement 3

CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or transmitters) are
installed, note the following:

• Do not remove the covers. Removing the covers of the laser product could result in exposure to

hazardous laser radiation. There are no serviceable parts inside the device.

• Use of controls or adjustments or performance of procedures other than those specified herein

might result in hazardous radiation exposure.

DANGER

Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the following.

Laser radiation when open. Do not stare into the beam, do not view directly with optical
instruments, and avoid direct exposure to the beam.

Class 1 Laser Product
Laser Klasse 1
Laser Klass 1
Luokan 1 Laserlaite
Appareil A Laser de Classe 1

2. Rotate the power-supply cage assembly out of the chassis. Lift up the power-supply cage handle and

pull the power-supply cage assembly all the way up until the retainer latch locks the cage in place
on the chassis.

166

ThinkServer TD200 Hardware Maintenance Manual

Summary of Contents for ThinkServer TD200



























































































































































































































































































































































Search results

Summary of Contents for ThinkServer TD200

Reviews:

Related manuals for ThinkServer TD200

Brands by name

Popular brands

Lenovo ThinkServer TD200, Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer TD200

Reviews:

Related manuals for ThinkServer TD200

Brands by name

Popular brands