Lenovo ThinkServer TD200, Hardware Maintenance Manual

Page: 56 / 346

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Chapter 8 “Parts listing, TD200 Machine Types 3724, 3808, 3809, 3815, 3817, 3824, 3826, 3836” on page
257 to determine which components are customer replaceable units (CRU) and which components are
field replaceable units (FRU).
• If an action step is preceded by “(Trained service technician only),” that step must be performed only by
a trained service technician.
Hostname set to %1
by user %2.(%1 =
CIM_DNSProtocolEndpoint.Hostname;
%2 = user ID) Info A user has modified the host
name of the IMM. No action; information only.
IP address of network
interface modified from %1
to %2 by user %3.(%1 =
CIM_IPProtocolEndpoint.IPv4Address;
%2 =
CIM_StaticIPAssignmentSettingData.IPAddress;
%3 = user ID) Info A user has modified the IP
address of the IMM. No action; information only.
IP subnet mask of network
interface modified from %1
to %2 by user %3s.(%1 =
CIM_IPProtocolEndpoint.SubnetMask;
%2 =
CIM_StaticIPAssignmentSettingData.SubnetMask;
%3 = user ID) Info A user has modified the IP
subnet mask of the IMM. No action; information only.
IP address of default
gateway modified from %1
to %2 by user %3s.(%1 =
CIM_IPProtocolEndpoint.GatewayIPv4Address;
%2 =
CIM_StaticIPAssignmentSettingData.DefaultGatewayAddress;
%3 = user ID) Info A user has modified the
default gateway IP address
of the IMM. No action; information only.
OS Watchdog response %1 by
%2.(%1 = Enabled or Disabled; %2
= user ID) Info A user has enabled or
disabled an OS Watchdog. No action; information only.
DHCP[%1] failure, no IP address
assigned.(%1 = IP address,
xxx . xxx . xxx . xxx )
Info A DHCP server has failed to
assign an IP address to the
IMM. 1. Make sure that the network
cable is connected.
2. Make sure that there is a DHCP
server on the network that can
assign an IP address to the
IMM.
Remote Login Successful.
Login ID: %1 from %2 at IP
address %3.(%1 = user ID; %2 =
ValueMap(CIM_ProtocolEndpoint.ProtocolIFType;
%3 = IP address,
xxx . xxx . xxx . xxx )
Info A user has successfully
logged in to the IMM. No action; information only.
Attempting to %1 server %2 by
user %3.(%1 = Power Up, Power
Down, Power Cycle, or Reset; %2 =
Lenovo_ComputerSystem.ElementName;
%3 = user ID) Info A user has used the IMM to
perform a power function on
the server. No action; information only.
48
ThinkServer TD200 Hardware Maintenance Manual