Leica GR10, Operational Manual

Page: 151 / 317

Printed Documentation
GNSS management: Create/Edit an Antenna
Field Descriptions
The table below describes the fields in the Create/Edit an Antenna tab.
Field Description
Name
The antenna name.
When editing an existing antenna, the antenna name can not be changed.
Horizontal offset
Horizontal distance from the physical reference point (ARP) to the point on the antenna
where the slope height reading is measured. If you are using vertical height readings
(Height Hook) this value may be 0. See also GNSS Management: Calculate the
antenna height reading .
Vertical offset
Vertical distance from the ARP to the point where the height reading is measured to. If
you are using slope height readings to a point above the physical reference plane this
value must be negative. See also GNSS Management: Calculate the antenna height
reading .
L1 phase offset
L2 phase offset
The L1 and L2 phase offset values.
IGS name
The IGS name for the anten a. n
Serial number
The antenna serial number.
Related topics
GNSS management: Antenna management
GNSS management: Select antenna
GNSS Management: Calculate the antenna height reading
150