Printed Documentation
Step-by-step initialize measurement engine
Initializing the measurement is mainly useful for special tracking applications. E.g. if unhealthy satellites are forced to
healthy and then set back to automatic health setting, it is recommended to initialize the measurement. Satellites with
bad health may transmit incorrect almanacs and ephemeris.
Step
Description
1
Open the receiver’s web interface in a browser window by typing in the receivers IP or host name.
2
Go to the
Receiver setup / Tools
page
3
Press the Initialize measurement engine
icon to delete the almanac and ephemeris.
The receiver will stop tracking satellites and lose the navigated position. It takes several minutes
for the receiver to start tracking again and regain a navigated position.
238
Summary of Contents for GR10
