Leica GR10, Operational Manual

Page: 98 / 317

6: Context sensitive help
Oscillator
An external oscillator can be used to provide a better quality time signal to the
receiver than the receiver's own internal clock. The same external oscillator can
also be used with a number of receivers so that each receiver is guaranteed to
be tracking satellites using the same time signal. An external oscillator is
attached to the receiver via the port OSC.
Select
Internal
to use the receivers internal clock, or
if an external oscillator is connected to the oscillator port, select the type of
external oscillator and the frequency.
•
TCXO:
A temperature compensated crystal oscillator (TCXO) is
used.
•
OCXO:
An oven controlled crystal oscillator (OCXO) is used.
•
Rubidium:
A rubidium based external oscillator is used.
•
Cesium:
A cesium based external oscillator is used.
If an external oscillator is selected but not connected, the
receiver will not track any satellite signals.
Restore default values
Press to restore the default values.
The restore default button fills all fields with the default
values and stores these values. Pressing the save button is
not necessary. When accepting the confirmation message,
all settings on this page are overwritten with the default
settings.
SBAS note
Activate SBAS for logging and streaming the SBAS data.
•
Activate the SBAS check box.
•
If needed, specify a certain SBAS satellite system in the
Track sat. syst.
list box or leave at
Automatic
to
have the receiver automatically select the SBAS system or set to
All
visible to use all SBAS satellite
systems that are tracked by the receiver.
The receiver will now include the SBAS data in all data streams and in all MDB and RINEX files written. Deactivate
the SBAS check box to stream/log without SBAS data included.
When SBAS satellites are tracked, the logged MDB and RINEX files will contain SBAS observations.
97