Leica GR10 Operational Manual Download

Page: 208 / 317

6: Context sensitive help

Receiver setup: Language management

Background information

The language management page allows selecting which language will be used on the receiver. Only one language

can be chosen at a time and the selection is valid for all users.

The default language is English. English will always be used if the provided language file does not contain a

translated token. For more information on translating please contact your local Leica Geosystems

Dealer/Distributor

in the country where you bought your product.

Setting Descriptions

The table below describes the fields in the Languages tab.

Setting

Description

Language

Lists all language files loaded onto the receivers SD card.

Code

A 2 letter abbreviation for the language file.

Release date

The release date of the language file. The English language file

is always released with the firmware file. No release date is

listed for English.

Version

The version number.

Delete

Select to delete the language file from the SD card.

The default English language file can not be deleted.

Install

Press to install the language file.

Upload new language file

Press to upload a new language file from the computer to the

receiver. Opens the

File upload

page.

Related topics

Receiver setup: File upload

207

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands