Leica GR10, Operational Manual

Page: 60 / 317

5: Getting started
Troubleshooting: Installing USB drivers
The Web interface is not available
1.
Have you Followed the steps outlined in Setup via Web Interface over USB, for the first time ?
2.
If the web interface is not available it might be necessary to manually assign an IP address to the virtual
network adapter. To do so please follow the steps below:
Windows XP
Step Description
1
Go to
Start
/
Control Panel
/
Network Connections
.
2
Right click the connection and enter the connection’s properties page. To identify the correct
network connection check the name of the network adapter which is used. The device name
must be
Remote NDIS based LGS GR Device
.
3
Select
Internet Protocol (TCP/IP)
and click on
Properties
.
4
Pick option
Use the following IP address
and choose an address in the range of
192.168.254.1 … 192.168.254.255 - except 192.168.254.2 which is the IP of the GR10. Use
subnet mask 255.255.255.0.
5
Disconnect and reconnect the USB cable.
Windows Vista
Step Description
1
Go to
Start
/
Control Panel
/
Network and Internet / View Network Status and Tasks.
2
Find the network connection using the
Remote NDIS based LGS GR Device
.
3
Click on
View status
.
4
Click on
Properties
.
5
Select the item,
Internet Protocol Version 4 (TCP/IPv4)
and click on
Properties
.
6
Pick option
Use the following IP address
and choose an address in the range of
192.168.254.1 … 192.168.254.255 - except 192.168.254.2 which is the IP of the GR10. Use
subnet mask 255.255.255.0.
7
Disconnect and reconnect the USB cable.
59