Leica GR10 Operational Manual Download Page 45

Page: 45 / 317

Printed Documentation

Please note that the underlined SD Card token in the Logging session properties pop-up box

opens an FTP access to the receivers SD card.

A pop-up box is also opened when clicking on the number of tracked satellites in the Tracking status block.

Press the

button in the upper right corner to close the pop-up box.

Tool tips

In the web interface, tool tips are used to explain the functionality of icons and buttons. Move the mouse over an icon

to show the tool tip.

Move the mouse away from the icon and the tool tip disappears.

Related topics

LED Indicators on GR10

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands