Leica GR10 Operational Manual Download

Page: 308 / 317

Appendix G: Event log messages

Event log messages

The following table provides an overview of Event log messages you might encounter when working with the GR10.

The list does not cover all possible messages. The majority of the messages are self-explanatory

and therefore no further explanations are given in the table below.

Message

Explantation / Action

Please consider running the support tool
manually. Support information has been
found on the receiver.

Go to

Support / Support tool

page and enter all

necessary information.

In the comment box mention that support information has

been found on your receiver and try to explain the latest

changes done on the receiver.

Then press the Mail icon

to send your support

information to Network Reference Stations support.

307

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands