Leica GR10 Operational Manual Download Page 201

Page: 201 / 317

Printed Documentation

Receiver setup: Tools

Receiver Setup: Tools - Overview

The Receiver Setup: Tools page allows:

Tab option

Description

Tools

Power down and reboot the receiver, format the SD card, initialise the
ephemeris and almanac and reset and store the receiver settings.

Firmware management

Load and delete firmware files.

Option management

Load or delete options on the receiver. This page lists all purchased options
that are currently installed on the receiver.

Language management

Upload language files from the computer to the receiver and select which
language should be used.

Receiver settings backup

Backup and upload receiver settings.

200

Summary of Contents for GR10






























































































































































































































































































































Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands

Leica GR10, Operational Manual

Search results

Summary of Contents for GR10

Reviews:

Related manuals for GR10

Brands by name

Popular brands